  The Construction Master Plus EZ (CMP EZ) is the newest in Calculated Industries' line of award-winning Construction Master Pro construction-math calculators. The big difference between the CMP EZ and the other models is that, in addition to many more built-in calculations, the CMP EZ is a Prompting Calculator.
Powerful built-in solutions guide you on the quickest path to solve virtually any construction-math problem in seconds. If a measurement changes, you can just scroll back to it, change it and then re-solve the problem.
The Construction Master Plus EZ has Basic and Advanced solutions for Rafters (Common, Hip/Valley and Jack) and Stairs. Plus, the built-in materials key gives you instant quantities for everything from drywall and roofing to tiles and pavers. Select the Details tab to see all of the possible solutions.
Features:
- Common Rafters
- Basic Solutions:
- Common Rafter Length
- Plumb Angle
- Level Angle
- Pitch
- Run
- Rise
- Advanced Solutions — all of the above plus:
- Common Rafter Length
- Common Tail Length
- Seat Cut
- Standard 2/3 HAP (Height Above Plate)
- Full Bearing HAP
- Hip/Valley Rafters
- Basic Solutions:
- Hip/Valley Length
- Plumb Angle
- Level Angle
- Common Cheek Angle
- Irregular Cheek Angle
- Advanced Solutions — all of the above plus:
- Total Hip/Valley Length
- Hip/Valley Tail Length
- Common and Irregular - Backing, Sheathing and Plan Angles
- Jack Rafters
- Basic Solutions:
- Common and Irregular
- Jack On-Center Spacing
- Offset Length
- Rafter Length
- Jack Rafter Lengths
- Plumb Angle
- Level Angle
- Cheek Angle
- Advanced Solutions — all of the above plus:
- Common and Irregular Tail Lengths
- Stairs
- Basic Solutions:
- Number of Risers
- Actual Riser Height
- Resulting Riser Offset
- Number of Treads
- Actual Tread Width
- Resulting Tread Offset
- Minimum Stairwell Opening
- Stringer Length
- Inclination Angle
- Stair Run
- Stair Rise
- Advanced Solutions — all of the above plus:
- Net Floor-to-Floor Height
- Rough Stair Run
- Finished Stair Run
- Toe Positions
- Other built-in solutions include:
- Square-Ups, Areas and Volumes
- Circular
- Arcs
- Rake Walls
- Arch Studs
- Balusters -- Cap Wall and Open Wall
- Elliptical Arches
- Crown Molding
- Compound Angles
- Polygons
- Spacing
- Material Calculations for Blocks, Drywall, Fencing, Footings, Pavers, Roofing, Studs, Tile and Grout
|
|    
Calculated Industries 8105 Blind Mark Magnetic Drywall Locator Tool
 |
